Flextronics MWB1300 Скачать руководство пользователя

Страница: 12 / 60

The following table describes the LED indications on the front panel of the MWS1000
Device.

Table 4 - MWS1000 LEDs

Name

Color

Description

Solid Green

The device is powered on.

Power

Off

The device is powered off.

Solid Green

The LAN port is connected and has a link.

LAN

Off

The LAN port is either not connected or has no
link.

Solid Green

The MWS1000 device is associated with a
MWB1305 AP.

Flashing Green

WPS pairing is in progress. This is a temporary
state that lasts no longer then 2 minutes.

WLAN

Off

The MWS1000 device is not associated with a
MWB1305 AP.

Solid Green

The wireless link conditions are excellent and the
MWS1000 device can consistently receive high
definition video streams.

Flashing Green

WPS pairing has finished successfully. This is a
temporary state that lasts for 30 seconds.

Solid Yellow

The wireless link conditions are fair and the
MWS1000 device can consistently receive
standard definition video streams but not high
definition video streams.

Flashing Yellow

WPS pairing has failed. This is a temporary state
that lasts for 30 seconds.

Link Quality

Off

The wireless link conditions are poor and the
MWS1000 device cannot receive video at all.

Содержание MWB1300




























































Результаты поиска

Содержание MWB1300

Отзывы:

Похожие инструкции для MWB1300

Бренды по названию

Популярные бренды

Flextronics MWB1300, Руководство пользователя

Результаты поиска

Содержание MWB1300

Отзывы:

Похожие инструкции для MWB1300

Бренды по названию

Популярные бренды