User’s Manual
2 - 11
Chapter 2
Installation
Installing a CD-ROM
1 Set the required jumpers on the CD-ROM
drive
according to the instructions of the manufacturer.
2 Attach the end of the peripherals cable to the CD-
ROM. The peripheral cable now connects both the IDE
drive and the CD-ROM.
3 Slide the CD-ROM drive into the upper chassis port.
4. Secure the CD-ROM drive to the chassis by inserting
mounting screws in all the holes and tightening these
screws with a screwdriver.
5. Connect an available power cable from the power
supply unit to the back panel of the IDE Drive. Note
that the power cable is directional and can only fit one
way.
1
2
3
4
Please adjust the button inside the
case to fit the CDROM's button.
Attach the IDE cable and power
cord to the CDROM.
Secure the CD-ROM drive to the
chassis by inserting screws.
Slide the CD-ROM drive into the
chassis from the top.
