background image

6

CARE AND PREVENTIVE MAINTENANCE

ENSURE repairs and maintenance of the trowel machine is performed 
only by qualified personnel.

CAUTION: Make sure the engine is shut down, isolated and cool 
enough before performing repairs and maintenance.

For preventive maintenance of the engine, please refer to the Owner’s 
Manual of the Honda engine supplied with the Ride on Power trowel. 
The following schedule should be followed when performing regular 
maintenance of the trowel: 

DAILY (8 – 10 HOURS)

• 

Check the oil level in the engine crankcase and gearbox before 
each use, refill as necessary. The gearbox is fitted with a sight 
glass, maintain the oil level at the half way level on the sight 
glass. 

• 

Check that the V-belt is running true. Adjust or replace as 
necessary.

• 

Keep the trowel clean and free of concrete residue after each 
use.

WEEKLY (50 – 60 HOURS)

• 

Check and clean or replace engine air filter as necessary.

• 

Check blades for their condition, and adjust or replace if  
necessary.

• 

Relubricate trowel arms, thrust collars and clutch.

MONTHLY (200 – 300 HOURS)

• 

Remove, clean, reinstall and relubricate the trowel arms and 
thrust collars.

• 

Check and adjust the trowel arms for alignment

• 

Remove, clean, reinstall and relubricate the clutch.

YEARLY (2000 – 2500 HOURS)

• 

Check arm bushings, thrust collar bushings, and shaft seals. 
Replace if necessary.

• 

Check the pitch control cable for wear. Replace if necessary.

TROUBLESHOOTING

SYMPTOM

POSSIBLE CAUSES AND 
CORRECTION

Motor does not start

 

„

Check the ON/OFF or dead 
mans foot switch to ensure 
that it is switched to “ON”

 

„

Check the runaway 
protection switch is 
operational

 

„

Check the fuel supply

 

„

Check the crankcase oil 
level. An oil sensor device 
is fitted to the motor, low 
oil level prevents the motor 
from starting or stopping

 

„

Check the carburettor jet 
and bowel to ensure they are 
clean

Motor stops

 

„

Check the fuel supply

 

„

Check that the fuel cock is 
turned on

 

„

Check the condition of the 
air filter

Petrol motor lacks power

 

„

Check the condition of the 
air filter

 

„

Check the condition of the 
spark plug

Содержание FP836









Отзывы: