①
LCD screen: for the switching, EDID, IP etc information display.
②
OUTPUT: 16 HDMI output buttons
③
INPUT: 16 HDMI input buttons
④
CONTROL:
UP
：
for upward controlling
EDID
：
Press it to enter EDID set mode. EDID Read
：
For example
，
in order to read the
EDID of output port OUT5 to input port 1, we need to press the EDID button(the
indicator of EDID lights) firstly, press the button 1 on IN side secondly, then press UP or
DOWN button to select OUT5, at the same time button 5 on OUT side lights, finally
press ENTER button (the indicator of ENTER button will flash for one time ).
SAVE:
Press to save the switching status.
Down
：
for upward controlling
ENTER:
Press to confirm to save the setting.
RECALL:
Press it to recall the presets/scenes.
⑤
IR: IR receiver for the IR remote control
Back panel
①
For the ground wiring
②
INPUT: 8 female HDMI Input ports
③
OUTPUT: 8 female HDMI output ports
④
RS232 IN:
Female RS232 port for the R232 control
⑤
RS232 OUT:
To control the surround RS232 equipment
⑥
LAN:
for the IP/TCP control, the default IP address is 192.168.1.80
⑦
DC12V:
power supply port
⑧
ON/OFF:
power off/on switch
