11
H. Kamerlingh Onnesweg 2
2408 AW Alphen aan den Rijn
The Netherlands
CONFIDENTIAL - THIS DOCUMENT MAY NOT BE DISCLOSED TO ANY THIRD PARTY OR USED FOR ANY
OTHER PURPOSE WITHOUT THE EXPRESS WRITTEN PERMISSION OF AV FLEXOLOGIC BV
CONFIDENTIAL
2
Use the arrows on the bottom right to move the plate backwards and get the microdots within
the field of view of the camera.
3
Click on “Close” and “Ok” to continue automatic mode.
4
DONE
Comments
15.
Microdots not recognized at mount position
This section describes the microdots not being recognized by the FAMM at mount position.
Step Action
1
When the button continue not found
(A)
is blinking, check if the microdots are within the field of
view of the camera;
2
When the microdots are not in the field of view, go to section13. If they are within the field of
view of the cameras continue to the next step.
3
Click on “manual” to enter the Semi-auto mounting screen:
4
Reset the zoom by clicking on “zoom” in the reset box:
A
