Flexlock Invisible, Руководство пользователя

Страница: 8 / 52

8 English
4 Startup
4.1 Preprogrammed lock
To activate the lock, remove the plastic strip. The lock is now
ready for installation. Note that the service card and the
programming card is also added in advance (In Mode 1 and 2,
can a User card or Ready to use be added, see 7.3 or 7.4.)
4.2 Unprogrammed lock
1. Insert a lithium battery recommended by
Swedstyle AB (of the type CR123A, 3V,
min 1400 mAh). Make sure that the battery poles
are the right way around.
2. Fasten the battery lid with a Torx 10 screwdriver.
3. Turn the lock over and insert the activation pin in the
socket on the back, hold down for about 3 seconds.
The programming signal will sound for about
7 seconds.
4. Place the programming card onto the lock before
the 7 seconds are up. A confirmation signal will
sound and the programming card is registered to
the lock. The lock is now in Mode 1 (factory mode).
5. Place the programming card on the lock again.
Repeated signals will sound.
6. Place the service card on the lock within 7 seconds,
a confirmation signal is heard.
The lock is now ready to be used according to the
programmed mode.
7. Add users, see point 7.4 or change Mode, see point 7.1.
7 SEC
7 SEC
4.1
4.2-1
4.2-3
4.2-2
4.2-4

















Programming







Programming
Service
Programming
3.
2.