FlexLink X45 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 44

FlexLink X45 Скачать руководство пользователя страница 10

Safety

4

5113196-3

1.2

The most important safety conditions

At the moment that the X45 system is going to be operated by a user, the
following safety conditions must be met:

•

Only persons who have read and understood the operating in-
structions are allowed to operate, maintain and clean the system.

•

Provide good ambient lighting to enable the operator to work well
and orderly with the system.

1.2.1

General

.

•

Incorrect use of the equipment can cause personal injury.

•

Do not wear clothing or other articles that can fasten.

•

Follow the instructions in this user manual when transporting the
machine. FlexLink Components AB must approve all modifica-
tions or changes to this system.

•

Only use recommended spare parts.

•

Only authorised personnel may open electrical units.

•

FlexLink is not responsible for damage if service on the equip-
ment is not performed in accordance with this user manual.

1.2.2

Service technicians

.

Service technicians must have:

•

Sufficient knowledge for reading technical information

•

Ability to comprehend technical drawings

•

Basic knowledge of mechanics

•

Sufficient knowledge in the use of hand tools

«
...
8
9
10
11
12
...
»

Содержание X45













































Отзывы:

Нет отзывов