background image

22

MTX-StarEnergy-M | 2020/10

MTX by © MATRIX ELECTRONICA S.L.U.

SUPPORT:

 [email protected]

SALES:

 [email protected]

mtxm2m.com

2.5.5 Other: Remote Console (TCP Server)

If at any time you need to perform a special remote operation on the MTX-StarEnergy-M, you can also do 

it through a “Telnet or SSH type” connection, you can do it by configuring this section. That is, with this 

special connection you can, by sending AT commands through a telnet-type connection, make a device 

configuration change, reset it, etc. In other words, the same thing that can be done by SMS messaging 

but by IP connection.

•  Enabled

: check this box if you want to use this special connection

•  TCP Port

: TCP listening port, where you must make the connection

•  Login

: username that will be requested after making the connection

•  Password

: user password that will be requested after entering the user name

•  SSH

: check the box if you want to use SSH instead of Telnet

ADDITIONAL NOTES

• 

Once  the  configuration  is  finished,  press  the  “SAVE  CONFIG”  button  to  save  the  changes. 

Remember that you must restart the device for the new changes to take effect. If you check/

uncheck the SSH box, be sure to also re-enter the password

 

Содержание Mtx MTX-STARENERGY-M










































Отзывы: