background image

3

It is the installer’s responsibility to carry out a full safety and function assessment of the appliance.

To reduce the risk of fire, electric shock or injury, read all the safety instructions and warning texts before using the unit.

•  This unit is only designed for ventilation air in housings or commercial buildings
•  It must not be used to extract combustible or flammable gases
•  Disconnect the mains plug before commencing any service and maintenance work
•  Before opening the door: switch off the heat, let the fans continue for three minutes to remove hot air, disconnect power from 

the unit and wait 2 minutes before opening the doors.

•  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, in 

order to avoid hazard.

•  The unit contains heating elements that must not be touched when they are hot
•  The unit must not be operated without the filters in place
•  Do not cook any combustible substances under the kitchen hood, if this is installed
•  Do not leave a saucepan or frying pan containing oil or grease unsupervised when using a kitchen hood
•  For the warranty to apply, the user manual instructions must be followed.

To maintain a good indoor climate, comply with regulations. To avoid condensation damage, the unit must never be 
stopped apart from during service/maintenance or in connection with an accident.

 Important Safety Instructions:

!

Symbols Used

These products bear a number of symbols used for 
labelling the actual product and in installation and user 
documentation.

UNI 3 User Manual

This appliance can be used by children aged from 8 years and above and 
persons with reduced physical, sensory or mental capabilities or lack of 
experience and knowledge if they have been given supervision or instruction 
concerning use of the appliance in a safe way and understand the hazards 
involved. Note that the product is not intended for use by children.

Children shall not play with the appliance. Cleaning and user maintenance 
shall not be made by children without supervision.

Our products are subject to continuous development and we therefore 
reserve the right to make changes. 

We also disclaim liability for any printing errors that may occur.

EXAMPLE OF NIPPLE LOCATION 
(shown as a right-hand model)

DANGER! ELECTRICITY

DANGER! DO NOT 
TOUCH

NB! 

When a text bears this symbol, damage to 

equipment or poor efficiency may be the conse-
quence of not following the instructions.

CAUTION! 

When a text bears this symbol, it 

means that personal injury or serious damage to 
the equipment may result if the instructions are 
not followed.

!

Extract air

Kitchen air

Outdoor air

Supply air

Exhaust air

Содержание UNI 3





























Отзывы: