Flexit ProNordic CS2500, Быстрое руководство

Страница: 5 / 12

5
C S 2 5 0 0
1.1.3. Login
In order to make changes to the system, it is normally
necessary to log in. There are four authority levels in
the system, and three of them are password protected.
7KHbOHYHODWZKLFKWKHXVHULVFXUUHQWO\ORJJHGLQLV
shown by the number of keys in the top left hand corner
of the display. The menus show more options or fewer,
depending on the level at which you are logged in.
The following key symbols will be used from now on
in the manual to describe the login level before the
GL΋HUHQWPHQXVIXQFWLRQVFDQEHPDGHYLVLEOHDQG
editable. The same key symbols are shown at the top
OHIWbRIWKHFRQWUROSDQHO
7KHIROORZLQJDFWLRQVDUHSRVVLEOHDWWKHGL΍HUHQW
levels:
Level 1: No restrictions, no password required.
• 5HDGDFFHVVWRDOOPHQXVH[FHSWV\VWHP
SDUDPHWHUVFRQȴJXUDWLRQDQGGHWDLOPHQXV
• Read access to alarm lists and alarm history.
Level 2: End user, password 1000.
One key symbol
• All rights as for level 1, plus:
• 5HDGDFFHVVWRDOOPHQXVH[FHSWFRQȴJXUDWLRQPHQXV
• Write access to the most important setpoints
(Setpoints/Settings > Setpoints).
• Alarms and alarm history can be acknowledged and
reset.
Level 3: System administrator, password 2000.
Two key symbol
• All rights as for level 2, plus:
• 5LJKWVWRDOOPHQXVH[FHSWΔ2FRQȴJXUDWLRQDQG
system settings.
Level 4: OEM, password given only in consultation with
WKH)OH[LWVHUYLFHRUJDQLVDWLRQ
Three key symbol
• All rights as for level 3, plus:
• Rights to all menus and system settings.
Start page > Main menu > Enter PIN
1.1.4. Set time/time channels
Start page > Quick menu > SetUp > Date/
Time Input
1.1.5. Set the calendar and timing program
Start page > Quick menu > SetUp >
Timeswitch program
General
This section describes functions and settings for the
timing program and calendars.
:KHQQRREMHFWZLWKKLJKHUSULRULW\IRUH[DPSOH0DQXDO
control <> Auto) is activated, the system can be switched
R΋RUWKHVWHSVFKDQJHGYLDWKHWLPLQJSURJUDP
$PD[LPXPRIVL[VZLWFKRYHUWLPHVFDQEHVSHFLȴHGSHU
day.
7KHFDOHQGDUVWRSRYHUULGHVWKHFDOHQGDUH[FHSWLRQ
which in turn overrides the normal timing program (only
LQRSHUDWLQJPRGH8SWRSHULRGVRUH[FHSWLRQGD\V
FDQEHVSHFLȴHGIRUHDFKFDOHQGDU
NB. Both setpoints for fan steps
and temperature setpoints
(comfort /economy) are controlled
by the timing program.
i