Flexit Pro7, Инструкции по эксплуатации и монтажу

Страница: 4 / 16

4
Installation
1a
2
a)
b)
c)
1b
1. Preparations
The motor unit has a unique bayonet
connection for ease of removal and
replacement in case of installation, change
of function and cleaning.
a) Lift the motor unit out of the wall frame.
Lightly grasp the spokes
and turn anti-clockwise.
b) The wall frame cover is retained by 3 screws.
Untighten these and remove the cover.
The screws will be retained by their gaskets and
do not need to be fully unscrewed.
2. Gaskets
To avoid water penetrating the fan, the wall frame has several
integral gaskets:
a) on the rear, gasket against the substrate.
b) by the cable bushing.
c) by the screw bushing, 3 in total.
If necessary, seal with silicone, etc.
Note: The fan is surface-mounted on walls or ceilings.
Seal any gaps between fan and ventilation duct.