M
aintenance Guide – Econordic heat pump
34
6.3 REMOVE THE FAN
STEP 1:
1.
Remove the four screws M 4 x 16 on the fan
bracket.
1
2
To remove the four screws (M4
x 16) use a Torx T20 tip. The fan
bracket can be sharp. It’s
recommended
to use
protective gloves.
IMPORTANT:
Hold the fan during removal of the
screws.
2.
Remove the spacer by unclipping the two clamps as shown in picture 1 and 2.
IMPORTANT:
Keep the fan in the left hand when unclipping the clamps.
