Flexit 115996, Руководство пользователя

Страница: 24 / 44

24
R O O M I E W I F I
&RQȴJXUDWLRQPHQX
Press the Menu button ( WRRSHQWKHFRQȴJXUDWLRQ
menu and select item Settings .
This menu settings are similar to the settings described
for the software for PC, page 135.
Wireless connection of several ventilation units
The unit operates in two modes:
Master. The unit acts as a leading unit in the network.
All the Slave unit and mobile devices are connected to
the Master unit via WiFi. The Master unit is operated
by means of a mobile device, the remote control or the
touch buttons on the unit casing. The control signal is
automatically transferred to the connected Slave units.
In this mode the unit responds to a signal from sensors,
as a humidity sensor, an external digital sensor, an exter-
nal analogue sensor 0-10V and changes its operation
mode respectively.
Slave. The unit acts as a driven unit in the network. The
Slave unit responds to a signal from the Master unit
only. Any other signals from other controls are ignored.
In this mode the unit ignores any other signals from the
sensors. In case of communication loss with the Master
XQLWDERYHVHFRQGVWKHXQLWLVWXUQHGR΍
Operation according to sensors
The Roomie One WiFi units react to sensor signals only
in Master mode.
The Roomie Dual WiFi units react to sensor signals in any
mode (both Master and Slave mode).
If any sensor is triggered in a chain of Roomie One WiFi
ventilation units, all the connected Roomie One WiFi
ventilation units in the chain switch to the high speed.
The Roomie Dual WiFi ventilation units to not change
their speed.
If any sensor is triggered in a chain of Roomie Dual WiFi
ventilation units, only the corresponding unit switches to
the high speed according to the humidity control
scenario. All the other ventilation units do not increase
their speed.