Flexin 230152, Руководство по установке, Страница: 19 / 87

17
Plan the installation
Planning is the key of a successful installation of a central vacuum system. A
balance between the best locations for the inlet valves and the practicality of
ENG
installing in these locations is essential. With a little ingenuity, most locations can
be reached.
Hose lengths
Let customers know that you will custom the hose size to fit each floor. Hose kits
come in 9 m, 12 m or 15 m lengths.
Power Unit Selection
It is important to keep in mind that air flow is reduced with longer hoses. To com-
pensate for the loss of air flow, a larger power unit is required.
Valve locations
A 50’ (15.2 m) hose will usually cover between 170-220 m
2
.
Plan pipe runs
Carefully read the “pipe runs” section of this guide. There is also a diagram of four
typical pipe runs.
Rough In
(measurements in mm)
182
143
Max
48 25
9.5
Min
50
261