Page
15
3.3. Recommendations for various installation types
Following flow chart is provided in order to help installers choosing the right type of boiler for desired
installation type. At the end of each tree is the number of corresponding appendix. Each appendix
consists of the following: the hydraulic drawing,
a typical electrical drawing,
the
description of
connection plate, the description of control panel
,
and the description of the complete central heating
system.
Central heating
type
Control panel
Central heating
and hot water
Central
heating
Instalation
type
Electronic
control panel
Basic
control panel
New installation
Existing installation
Instalation
type
New installation
Existing installation
Control panel
Instalation
type
Electronic
control panel
Basic
control panel
New installation
Existing installation
Instalation
type
New installation
Existing installation
Note:
These installation samples should not be used as the detailed installation plan. Before
installation observe the local regulations.
3.4. Installation site
3.4.1. Position of a boiler
The location must provide adequate space for
servicing and air circulation around the boiler. The
boiler may be installed in any room, although particular attention is drawn to the
local regulations in
respect to
the installation of a boiler in a room containing a bath or a
shower. The boiler must be
mounted on a flat, vertical wall, which must be sufficiently robust to bear
t
he weight of the boiler. The
boiler may be installed on a combustible wall, subject to the requirements of the Local Authorities and
Building Regulations.
T
h
ermo-Extra-
e Appendix - 2
T
h
ermo-BlokPTV-
m Appendix - 3
or
T
h
ermo-Extra-m
Appendix - 4
T
h
ermo-Extra-
m Appendix -
4
T
h
ermo-Blok-
eAppendix - 5
or T
h
ermo-Extra-e
Appendix - 6
T
h
ermo-Extra-
e Appendix - 6
or
T
h
ermo-Extra -m
Appendix - 8
T
h
ermo-Blok-
m Appendix - 7
T
h
ermo-Extra-
m Appendix - 8
T
h
ermo-Blok PTV-e
Appendix - 1
or
T
h
ermo-Extra-e
Appendix - 2
