2. MAINTENANCE
›When the operating mode is different from OFF, press the 'button for 10 seconds
wait for the blinking “tS” message to appear on the display, and release the key. In this way you have entered the Installer menu.
'of power
›To exit the fault history menu and go back to the Installer menu, press the
button '
'.
›To reset the anomaly history, press the '
written "rE", and confirm by holding down the 'key for 3 seconds
50
SF 14 EVOLUTION NOx - RAD - ENG - Manual - 2009.1_HDIMS13_firm.05_R9
2Cod
isiegnalazionalanomalies_water heater_HDIMS13_firm.05
TO DISPLAY THE LAST 11 ANOMALY REPORTING CODES, FROM THE MOST RECENT CHRONOLOGICAL ORDER, PROCEED
IN THE FOLLOWING WAY:
›To enter the anomaly history menu, press the '
display the word "Hi", and confirm by pressing the 'key
›Scroll through the list of stored anomalies using the '
the anomaly signaling code preceded by the chronological index is displayed (for example: '01' 'last anomaly'), in the absence of
errors the message '- -' will be displayed.
Содержание SF 14 EVOLUTION NOx
Страница 23: ......
