Maintenance and checks
Keep the teeth of the gear wheel clean and
greased.
Keep the bore of the gear wheel clean and
grease the surface of the bore before use.
Inspect the tool for wear, clearance, damage
before use. Do not use the spring tensioning
tool if safety is not assured !
95 122 991
rev. 30-10-2018
1
Maintenance and checks
Check dimensions A,B,C and D !
(See page 9,10 and 11)
Do not use the spring tensioning
tool if wear limits are crossed !
95 122 991
rev. 30-10-2018
2
1,5 mm
Keep sickle lever clean.
95 122 991
rev. 30-10-2018
3
Grease the nipple on the rear
after tensioning 50 springs
95 122 991
rev. 30-10-2018
4
Test run the device,the surplus of grease
will come out of the drive unit
