Camera
Kite
User
Manual
19
•
Insert the wingtip spars into each wingtip sleeve and close each of the Velcro fold-over ends.
Each wingtip spar needs to be located close to the bottom of the wingtip sleeve so the tip of the
wingtip spar is snug into the Velcro folded-over end. Note that the wingtip spars are shorter than
the length of the entire wingtip sleeves for improved aerodynamics. There is supposed to be
loose wingtip sleeve material towards the nose of the kite. (Important)
•
Insert the top spine spars into each of the top spine sleeves and close each of the Velcro fold-
over ends. Note that these top spine spars will utilise the entire length of the top spine sleeves.
Camera Kite Assembly
•
Insert the spreader spar into the spreader spar pockets which are situated on the top of the kite
and be sure to pass the spreader spar fi rst through the two guiding loops that are located on the
top spine spar sleeves.
•
Check if the bridle line and black wingtip bungees are free and untangled.
•
Your kite is now ready for its fi rst test fl ight.
