flexicelcrea T13FHL-7, Инструкция по установке и использованию

Страница: 10 / 18

10
2.3 Operation mode
The Factory default mode is permanent hold mode, you can also
select other operation modes according to the following settings:.
- Program operation mode
In the program operation mode, the thermostat will run according
to the program schedule.
- Temporary hold mode
In temporary hold mode, the new temperature will be maintained
only until the next programmed time period begins.
- Permanent hold mode
In permanent hold mode, the new temperature will be maintained
until you manually change it.
- Mode switching
In the main operation interface, turn the adjust button to set the
temporary/permanent temperature you need. If you want to cancel
these two modes, press the back button, then an option shows up
on the screen, choose “YES”, press “OK”.
2.4
Frost mode
Press the ‘ON/OFF’ button at the top right corner of the thermos-
tat, don’t release until the screen shows a message, choose what
do you want to do. In Frost mode, the screen will show the picture
below.