4
5
6
7
1
3
Name of App
ColorEasy3 Plus
PWM frequency
8000 Hz (8KHz)
RF Remote
Yes
RF Remote Frequency
433.92MHz
Working Voltage
6-24VDC
Bluetooth Control Distance
>10m in open area
Rated Output Current
3x5A
IP Grade
IP68
Auto Circuit Protection
Overload/Overheat/
Short Circuit/Overcurrent
2. Bluetooth Auto Reconnecting
The default setting of the receiver enables an
auto-reconnecting feature. The controller will
automatically connect to the latest paired
smartphone when in range. However, if auto-re-
connect is not desired, it can be disabled in the
app’s setup page when the controller is connected
to the smartphone. When the auto-reconnecting
feature is set to off, the user can still manually
connect to the controller at any time by tapping
the controller bluetooth device name on the
smartphone’s bluetooth setting page when the
controller is powered on.
3. Using the Included External RF Remote
The hand held remote (FF-JUN-HAND) and the
wall switch type (FF-JUN-WALL) RF wireless
remote control are included with the Juno™ Series
LED controllers. These RF remote controls can be
used to turn the LED controller on/off and switch
between the previously saved scenes in the app.
The RF remote controls need to be paired to the
main unit before use with the following steps:
1.
Ensure the remote control function is
enabled on the app setting page while the LED
controller is paired to the smartphone.
2.
Power off the LED controller for more than 5
seconds and power on again.
3.
Within 5 seconds of LED controller powering
Flexfire LEDs, Inc.
www.FlexfireLEDs.com
1-844-FLEXFIRE
QR Links to Download App
on, press on/off key and downward key togeth-
er on the remote controller.
4.
The indicator on the LED controller will flash
white 3 times to show the remote control is
recognized. A maximum of five remote controls
can be paired to one LED controller and can be
used at the same time.
The preset color scenes or dynamic mode sets
saved within the smartphone app can be selected
by pressing the up/down key on the remote
control. These preset scenes can be customized
within the smartphone app. The RF remotes offer
simplified control of the RGB lights. For full
functionality, the app must be used.
Other Features
These controllers have full protection against
output short circuits, overloads, and overheating.
The indicator flashes red due to overload or
electrical short circuit, and flashes yellow if
overheating. The controller will automatically
recover when the fault is corrected. Please ensure
the LED loads are within the rated voltage range,
not shorted and protected against overheating.
Automatic Circuit Breakers
Voltage Range
This controller can work on 6-24VDC. Be sure the
input signal, power supply and LED load are all
using the same voltage. The controller cannot
work with different voltage input and output. Also,
the wrong voltage may damage the LEDs. e.g. Do
not use 12V LEDs with a 24V power supply.
Environmental Protection
This waterproof version is designed with the IP68
standard and can be used underwater up to a
depth of 100ft (30 meters). When installing under
water, make sure the cable connections are
waterproof.
Note:
The bluetooth connection and RF remote
control sensitivity is decreased when the LED
controller is installed in a wet environment or
under water.
Specifications
Model
FF-JUN-APP-RGB-COMBO
Dynamic Mode
42 modes
Static Color
16 vivid colors
Connection Method Bluetooth V2.1/4.0 Class 2
Smartphone OS
iOS or Android
V.2018.09.17
