Flexcom Communication Ltd
Installation and operating instructions (2021/03/24)
10/25
Preparing the SIM card
As with mobile phones, a SIM card is required to operate the device. The device communicates with
the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.
You can purchase the card independently from your mobile service provider or, in the
case of a software subscription, from your product distributor. If you received the SIM
card from your dealer, you do not need to make any settings: the card is already set up,
inserted in the device, switched on and ready for use.
If you have received the SIM card from your dealer, do not try to transfer it to another
device (eg phone) and use it! The distributor (service provider) will reimburse the
resulting costs or the correction of the resulting errors.
Settings for your SIM card
If you did not obtain the SIM card from your tracking device vendor, you must set it up before
inserting and using it in the device, which you can do as follows.
Disable SIM card PIN and other functions
Insert the SIM card in your phone.
1.
Among the setting functions of the phone
2.
turn off the PIN code request, auto-reply and call forwarding options.
3.
After turning off the above, insert the card into the tracking device. See the next section for
instructions on how to insert the SIM card.
Setting up data traffic
If you want to operate the device not only via SMS, but also e.g. If you use the software tracking
service provided by your dealer, you must activate GPRS (Internet) data traffic and use the
appropriate network settings if you use your own SIM card. To do this, you must send SMS messages
from your phone to the phone number of the SIM card inserted in the tracking device, as shown in the
table below.
Before sending the instructions in the table below from your phone to the phone number
of the device's SIM card, set the administrator's phone number on the device in a
preliminary SMS.
Send an SMS from your phone to the phone number of the device with the following
content: password,sos1,phone-number#
Example: 123456,sos1,06209876543
All other commands sent via SMS will only be received and executed. Always use
Flexcom
