Flexcom ICAR IK122, Инструкция по установке и эксплуатации, Страница: 19 / 24

Flexcom Communication Ltd Installation and operating instructions (2021/03/12)
19/24
Select the desired setting or, when
sending a command, select
Commands.
Control the device with SMS commands sent from a mobile phone
The factory-set access password for the tracking device in the commands: 123456
General settings
Function Description SMS message
Device
response
Administrator phone number
After setting the administrator's phone number, the
tracking device only accepts certain commands in
SMS messages from that number. The command -
given the password - can be issued from any phone.
admin123456 telefonszám
Example: admin123456 00361234567
Use to enter the phone number
country code prefix (eg 0036, Hungary).
Admin Ok
Server setup
If you use your device through a computer service,
enter the address of the server that receives the
data. The command can only be issued from the
administrator phone.
IP url port
Example: IP www.szerver.com 8012 Set IP Ok
Setting time zone
The device default time zone is set to GMT + 0. This
is changed (eg in the case of Hungary, the time
zone is GMT + 1), as follows.
timezone123456 value (where value: pl.
+1, -2, 0 etc).
Example: timezone1
Time Ok
Frequency of data
transmission
Frequency of data submission in case of data
collection on a server. The command can only be
issued from the administrator phone.
upmovejelszó seconds
Example: upmove123456 30 Ok
Voice monitoring
Turn on the monitoring of ambient sounds and
noises (microphone reception). The command can
only be issued from the administrator phone.
88
Monitor Ok
Initialize satellite connection
Search for satellites. The command can only be
issued from the administrator phone.
CQGPS
GPS reset Ok
Restart the device
You can also switch the device on and off (restart)
from your phone. The command can only be issued
from the administrator phone.
CQ
Reset Ok
Turn off the device remotely
You can also turn off your device from your phone.
The command can only be issued from the
administrator phone.
poweroff,123456
Poweroff Ok
Checking the device
Retrieve device status information. The command
can only be issued from the administrator phone.
CXZT
Data set
characterizing
the operating
status of the
device.
Factory default setting
Reset the device to factory settings. The command
can only be issued from the administrator phone.
Format
Ok
Flexcom