Flex X 1107 VE, Оригинальная инструкция по эксплуатации

Страница: 15 / 150

X 1107 VE
15
Continuous operation with engaged
switch rocker:
`^rqflk>
cçääçïáåÖ=~=éçïÉê=Ñ~áäìêÉI=íÜÉ=ëïáíÅÜÉÇ=
çå ÉäÉÅíêáÅ=éçïÉê=íççä=ïáää=ëí~êí=êìååáåÖ=~Ö~áåK

Push the switch rocker forwards and
engage by pressing the front end.
Switch off the machine:

To switch off the power tool, release the
switch rocker by pressing the rear end.
Speed control

The thumb wheel can be used to steplessly
vary the speed from 1 (low) to 6 (high) even
while the power tool is running.
As a result, the grinding speed can
be optimally adjusted to the particularly
material and the working conditions.
Operating instructions
klqb
tÜÉå=íÜÉ=éçïÉê=íççä=áë=ëïáíÅÜÉÇ=çÑÑI=
íÜÉ ÖêáåÇáåÖ=íççä=ÅçåíáåìÉë=êìååáåÖ=ÄêáÉÑäóK

Hold the sander with both hands.

Do not overload the sander by applying
excessive pressure. An excessive increase
in the contact pressure will not increase
the grinding performance, but will increase
the wear on the electric power tool and
the sanding tool.
For further information on the manufacturer’s
products go to www.flex-tools.com.
Maintenance and care
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Cleaning

Regularly clean the power tool and venti-
lation slots.

Using dry compressed air, regularly blow
out the housing interior and motor through
the ventilation slots.
Carbon brushes
The electric power tool features cut-off carbon
brushes.
When the cut-off carbon brushes reach their
wear limit, the electric power tool switches
off automatically.