ORE 150–3 / ORE 150–5
14
Technical specifications
Instructions for use
WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Before switching on the power tool
Unpack the electric power tool and check
that no parts are missing or damaged.
Attaching/changing the sanding
sheet
The sanding plate has Velcro fasteners
and is therefore designed exclusively
for use with Velcro sanding sheet.
Pull out the mains plug.
Remove used sanding sheet (1.).
Remove any coarse debris from
the sanding plate.
Attach new sanding sheet (2.).
Align the holes in the sanding sheet
with the holes in the sanding plate.
Attach the sanding sheet by gently
pressing it against the Velcro fasteners
on the sanding plate.
Dust extractor
Use the electric power tool only with
an extractor. This will prevent high dust
loads in the working air and coarse debris
at the workplace.
The grinding dust is extracted directly from
the point of abrasion through the extraction
channels in the sanding plate.
The electric power tool can be used with
the integrated extractor or with a connected
extraction system.
ORE 150–3
ORE 150–5
Machine type
Random-orbit sander
Voltage
V/Hz
230/50
Power input
W
350
Oscillating circuit diameter
mm
3
5
Idling speed
min
-1
5800–10000
5800–10000
No-load number of oscillations
min
-1
11600–20000
11600–20000
Shape of the sanding plate
Round
Size of the sanding plate
mm
Ø 150
Weight (without power cord)
kg
1.87
1.87
Protection class
II/
