Flex MXE 1000, Оригинальная инструкция по эксплуатации, Страница: 16 / 188

MXE 1000/MXE 1002/MXE 1200/MXE 1202/MXE 1602
16
Overload protection
In the event of a short and extreme
overload, the overload protection device
prevents damage to the motor by switching
the tool off automatically.
For further information on the
manufacturer’s products go to
www.flex-tools.com.
Maintenance and care
WARNING!
Before performing any work on the mixer,
pull out the mains plug.
Cleaning

Regularly clean the power tool and
ventilation slots.

Regularly blow out the housing interior
and motor with dry compressed air.

Clean the mixer paddle straight after use.
Do not allow the mixed product to dry on.
Gear
NOTE
Do not loosen the screws on the gear head
during the warranty period. Failure to comply
with this requirement will invalidate any
claims under the manufacturer's warranty.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
Mixer paddles for different applications and
other accessories can be gleaned from
the manufacturer’s catalogues.
Exploded drawings and sparepart lists can
be found on our homepage:
www.flex-tools.com
Disposal information
WARNING!
Render disused power tools unusable by
removing the power cord.
EU countries only.
Do not dispose of electric power tools
in the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and its incorporation
into national law, used power tools must be
collected separately and recycled in an
environmentally friendly manner.
NOTE!
Please ask your dealer about disposal
options.
-Declaration of Conformity
We declare on our sole responsibility that the
product described in “Technical specifications”
conforms to the following standards or
normative documents:
EN 60745 according to the provisions of
Directives 2014/30/EU, 2006/42/EC,
2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
18.09.2018
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Exemption from liability
The manufacturer and his representative
are not liable for any damage and lost profits
due to interruption in business caused by
the product or by an unusable product. The
manufacturer and his representative are not
liable for any damage which was caused by
improper use of the power tool or by use of
the power tool with products from other
manufacturers.