Flex L3309 Series, Руководство по эксплуатации, Страница: 20 / 204

Angle grinder L3309-115/125/FR, L3410FR/VR, L3325FR
20
Maintenance and care
Danger!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Cleaning
Danger!
If metals are ground or cut over a prolonged
period, conductive dust may become
deposited inside the housing.
Impairment of the protective insulation!
Operate the power tool via a residual-
current-operated circuit-breaker (tripping
current 30 mA).
Regularly clean the power tool and ventila-
tion slots. Frequency of cleaning is depen-
dent on the material and duration of use.
Regularly blow out the housing interior
and motor with dry compressed air.
Carbon brushes
The angle grinder features cut-off carbon
brushes.
When the wear limit of the cut-off carbon
brushes is reached, the angle grinder
switches off automatically.
Note!
Use only original parts supplied by the
manufacturer for replacement purposes.
If non-original parts are used, the guarantee
obligations of the manufacturer will be
deemed null and void.
When the angle grinder is being used,
the carbon brushes can be seen sparking
through the rear air inlet apertures.
If the carbon brushes spark excessively,
switch off the angle grinder immediately.
Take the angle grinder to a customer service
workshop authorised by the manufacturer.
Gears
Note!
Do not loosen the screws on the gear
head (6) during the warranty period.
Non-compliance will deem the guarantee
obligations of the manufacturer null and
void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
For other accessories, in particular grinding
tools, see the manufacturer’s catalogues.
Spare-part/Accessory Order
no.
115 mm guard 265.853
125 mm safety guard 294.438
SoftVib handle 316.857
Clamping flange A/F 14 191.612
Clamping flange A/F 17 191.604
Clamping nut 100.080
FixTec quick-release clamping nut 313.459
SDS-Clic quick-release clamping
nut 253.049
Metal carrying case 303.224