Flex L2106VC, Руководство по эксплуатации

Страница: 18 / 198

Angle grinder L 2106VC, L 2108 VC
18
6. Press and hold down the spindle lock
(6).
7. Tighten the clamping nut with the stop
key.
8. Insert the mains plug into the socket.
9. Switch on the angle grinder (without
locking into position) and leave the angle
grinder running for approx. 30 seconds.
Check for imbalances and vibrations.
10.Switch off the angle grinder.
Operating instructions
Note
When the angle grinder is switched off,
the grinding tool continues running briefly.
Rough-grinding
Danger!
Never use cutting-off wheels for rough-
grinding.
– Angle of wheel 20–40° for best cutting
performance.
– Applying moderate pressure, move the
angle grinder backwards and forwards.
As a result, the workpiece will not
become too hot and there will be no
discoloration; nor will there be any
grooves.
Cut-off grinding
– Hazardous quartz dust is produced
when bricks, concrete and natural stone
are cut. For the sake of your health use
guards with the option of connecting
a dust extractor!
– Do not press, tilt or oscillate the angle
grinder.
– The angle grinder must always be
operated backwards, see diagram.
Otherwise, there is a risk of the angle
grinder jumping uncontrollably out of the
groove.
– Adjust the feed to the material which is
to be cut:
the harder the material, the slower the
feed.
For further information on the manufac-
turer’s products go to www.flex-tools.de.
WS_Gr6.book Seite 18 Donnerstag, 19. Mai 2005 2:11 14