THRUST VECTOR NOZZLE SETUP
Position the FlexJet TV so that it is level. Standing approximately 10-20 feet (3-7 m) behind the aircraft, visually sight the Thrust
Vectoring Nozzle:
The Thrust Vectoring Nozzle should be perfectly centered from the left and right. Adjust the ball links as necessary to correct.
The Thrust Vectoring Nozzle should carry approximately 1/16" (1.5 mm) up thrust at aft edge. Adjust the ball links as necessary to
correct.
1.
2.
18
Required Tools and Fasteners:
MISSILE RAIL INSTALLATION
Required Tools and Fasteners:
5-min Epoxy or Medium CA
1.
2.
3.
Test fit the missile rails to the wings.
Please note, the missile rails are asymetrical and will only fit properly in one direction
.
Mix and apply an appropriate amount of 5-min epoxy to the missile rail and wing. Place the missile rail onto the wing.
Avoid using too
much glue as isopropyl alcohol will mar the paint of the FlexJet.