Flex ALC 3/1-Basic, Оригинальная инструкция по эксплуатации

Страница: 15 / 184

FLEX ALC 3/1–Basic
15
Technical specifications
1) The measurement range may be less under
unfavourable conditions (bright sunlight,
reflective surfaces).
2) The operating duration was determined with
all activated laser beams.
The operating duration can be extended
if beams which are not required are switched
off by selecting a different operating mode.
Instructions for use
WARNING!
– Do not point the laser beam at people
or animals.
– Do not look into the laser beam.
– Do not put any optical instruments in the
path of the beam.
This measuring instrument generates laser
radiation which may cause blindness.
CAUTION!
– Do not use the measuring instrument
in a damp, dusty or sandy environment.
Device components may be damaged.
– After using the device, immediately switch it
off with the On/Off switch in order to block
self-levelling.
Cross-line laser ALC 3/1
Visible laser diode 635–650 nm
Laser class 2
Work area
– Horizontal/vertical beam
1)
– Ground beam (plumb)
20 m
5 m
Precision ...
– Horizontal/vertical beam
– Ground beam (plumb)
± 0.3 mm/m
± 0.6 mm/m
Self-levelling range ± 4°
Power supply 3 x LR6/AA
Operating duration
2)
6 h
Temperature range
– for operation
– for storage
–5 °C ... 50 °C
–20 °C ... 70 °C
Weight (with batteries) 584 g
ALC3-1.book Seite 15 Donnerstag, 25. Juni 2015 1:00 13