Flex ALC 2/1-Basic, Оригинальная инструкция по эксплуатации

Страница: 15 / 174

FLEX ALC 2/1–Basic
15
Technical specifications
1) The measurement range may be less under
unfavourable conditions (bright sunlight,
reflective surfaces).
2) The operating duration was determined with all
activated laser beams. The operating duration can
be extended if beams which are not required are
switched off by selecting a different operating
mode.
Instructions for use
WARNING!
– Do not point the laser beam at people or
animals.
– Do not look into the laser beam.
– Do not put any optical instruments in the path
of the beam.
This measuring instrument generates laser
radiation which may cause blindness.
CAUTION!
– Do not use the measuring instrument in
a damp, dusty or sandy environment.
Device components may be damaged.
– After using the device, immediately switch it
off with the On/Off switch in order to block self-
levelling.
– If the device is brought from a very cold to
a warmer environment or vice versa, you
should allow the device to acclimatise before
using it.
Cross-line laser ALC 2/1
Visible laser diode 635 nm
Laser class 2
Work area
– Horizontal/vertical beam
1)
20 m
Precision ...
– Horizontal/vertical beam ± 0.3 mm/m
Self-levelling range ± 4°
Power supply 3 x LR6/AA
Operating duration
2)
12 h
Temperature range
– for operation
– for storage
–5 °C ... 50 °C
–20 °C ... 70 °C
Weight (with batteries) 421 g
ALC2-1.book Seite 15 Donnerstag, 25. Juni 2015 10:28 10