FLENDER ZAPEX, Руководство по сборке и эксплуатации

Страница: 41 / 74

M3560-02en Edition 09/2022 41
Operation
7
7.1 Normal operation of the coupling
7.1 Normal operation of the coupling
The coupling runs quietly and shock-free during normal operation.
7.2 Fault – causes and correction
7.2 Fault – causes and correction
A form of behaviour which is different to normal operation is classed as a fault and has to be
rectified immediately.
Look out specifically for the following faults during coupling operation:
• Unusual coupling noise
• Sudden occurrence of shocks
• Lubricant leakage
7.2.1 Procedure in the event of faults
7.2 Fault – causes and correction
DANGER
Danger due to bursting of the coupling
There is a risk of fatal injury from flying fragments. Bursting of the coupling can lead to an
explosion in potentially explosive atmospheres.
• Switch off the unit at once if any faults occur.
• Note during the repair work the possible causes of faults and the notes on rectifying
them.
Proceed as described below if there is a fault of the coupling during operation:
1. Turn the drive off immediately.
2. Initiate the required action for repair taking into consideration the applicable safety regu-
lations.
If you cannot determine the cause or if you cannot carry out repair work with your own
means, request one of our customer service technicians.
7.2.2 Identifying the fault cause
7.2 Fault – causes and correction
Faults occur frequently due to application errors or they occur due to operational circum-
stances such as wear of wearing parts or changes to the system.
The faults and fault causes listed below only serve as an indication for troubleshooting. In
the case of a complex system be sure to include all the system components in the search for
the fault.