01
SUMMARY
1.2 Main Components
1.3 Technical Characteristics
1. Introduction
02
1.1 Safety
02
02
03
2. Installation and Pre Operation
2.1 Installation
2.2 Pre Operation
03
03
03
4. General Safety Practices
4.1 Basic Operation Procedures
4.4 Operation
4.2 Safety Procedures and Notes Before Switching the Machine On
4.5 After Finishing the Work
4.3 Routine Inspection
4.6 Maintenance
4.7 Advices
05
05
06
07
07
07
07
08
5. Analysis and Problem Solving
5.1 Problems, Cause and Solutions
08
5.2 Electric Diagram Mod. L-02/04/06/08/10HD
08
08
3. Operation
3.1 Starting
3.3 Cleaning
3.2 Operating Procedures
04
04
04
04
08
Electrical or mechanical maintenance must be done by qualified personal for such
operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY
conditions when working.
4.7 Advice
IMPORTANT
Always unplug the machine when emergency cases arise.
5.1 Problem, causes and solutions
The Heavy Duty Industrial Blenders were designed to operate with the need of
minimum maintenance but the natural wearing caused by longer use of the equipment may
occasionally cause some malfunctions.
If such problem occurs with your Blender refer to Table 02 in which the most
common situations are listed with recommended solutions.
Table 02
Problems
Causes
Solutions
* Lack of power.
* Problem in the electric circuit
of the machine. interno ou
externo da máquina.
* Check if machine is
plugged in and if there is
power in the power supply
source.
* The machine does not turn
on.
*Cup is leaking.
* The machine turns on but
the Motor turns slowly.
* Damaged seal.
* Defected motor capacitor.
* Call technical assistance.
* Call technical assistance.
* Call technical assistance.
5 Analysis and Problems Solving
5.2 Electrical Diagram Mod. L-02/04/06/08/10HD
Chave Liga/Desliga
Chave Seletora 110/220 Volts
Содержание L - 02
Страница 2: ......
