Fleetwood 2015 Discovery, Руководство пользователя

Страница: 96 / 111

maintenance
11-4
InterIor
Fabrics
Interior appointments such as draperies, bed-
spreads, mattress covers, upholstery and wall
pads are manufactured from high quality mate-
rials and should be dry cleaned only . Frequent
vacuuming will keep them free of dust and dirt .
Minor spills should be cleaned up quickly to
avoid staining . The affected area should be blot-
ted, not rubbed, to prevent the stain from work-
ing deeper into the fabric .
Solid Surface top Care
(If equipped)
The counter top is constructed of a solid surface
material that requires little care . Routine care
involves wiping the surface with a damp cloth to
remove water marks . For stains, wipe with soapy
water or ammonia-based cleaners . Remove stub-
born stains on the “matte/satin” finish with an
abrasive cleanser .
Laminate top Care
(If equipped)
For cleaning laminate surfaces, uses mild dish
washing liquid with warm water . Use a soft
cloth for both washing and drying .
Do not use abrasive cleaners, steel wool, or gritty
cleaners or damage will occur to the surface .
Walls and Ceiling Panels
The paneling and the ceiling of your motor home
may be any of several finishes and textures. Never
use harsh detergents or abrasive cleaners on walls
or ceilings . Most surfaces will clean with a soft
cloth moistened with mild liquid detergent in
warm water, or a clear window cleaner solution .
Do not scrub the surface or use large amounts of
water which could saturate the material . Simply
spray or apply the solution to the spot and blot
with a clean dry rag or paper towel . Aggressive
scrubbing may damage the texture or pattern .
Attaching Accessories to
Your Motor Home
The sidewalls of your motor home are built with
a dense fiber and polymer panel or rigid wood
panel used as a substrate to the exterior fiber -
glass or interior finish surface.
Structural members are located specifically to
mount and attach factory-installed components
and accessories, and may not be located to accom-
modate after-market accessories not specifically
designed for use on or in your motor home .
Exterior: Please consult with your dealer before
attempting to install or mount accessories on the
sidewalls or roof of your motor home . holes
drilled in the sidewall may cause damage,
and may affect portions of your warranty.
Interior: If you want to attach items to the inte-
rior walls, you musT use riveTs . The
rivets can be installed with a hand-operated tool
such as the Arrow E-Z Pull Model RH200 . This
and similar tools are available in most hardware
stores and home improvement centers .
When you install a component, carefully mark
the hole location and drill a 3/16” hole where
the rivet is to be located .
If you need rivets, contact your Fleetwood dealer .
Plastic/Fiberglass Shower Stall
Some cleaners attack the plastic causing it to
discolor and become brittle . The following
cleaners have been tested and approved when
mixed with water:
• Distilled vinegar
• Mild dishwasher detergent
Do not use any type of screw to attach items to
the interior or exterior walls of your motor home. If
you want to attach items to the walls, you must use
expanding head type rivets. Rivet quantity, length, and
grip range, will vary depending on item to be attached.
cautIon
warnIng
Do not use lacquer thinner, nail polish remover, car-
bon tetrachloride, spot remover, gasoline, or naphtha
for any cleaning purpose. These products may cause
damage to the material being cleaned, and may be
highly flammable or poisonous .
!