FEDERAL CERTIFICATION TAG
MFD BY:
DATE MFD:
INC VEH MFD BY:
DATE OF VEH MFD:
GVWR:
0
KG (
LB )
FRONT GAWR:
0
KG (
LB )
WITH:
RIMS
TIRES AT:
0
KPA COLD SINGLE
(
PSI )
INTERMEDIATE
KG (
LB )
GAWR:
WITH:
RIMS
TIRES AT:
KPA COLD
(
PSI )
REAR GAWR:
0
KG (
LB )
WITH:
RIMS
TIRES AT:
0
KPA COLD DUAL
(
PSI )
GAWR COMBINED INTERMEDIATE
AND REAR:
0
KG (
0
LB )
THIS VEHICLE HAS BEEN COMPLETED IN ACCORDANCE WITH THE PRIOR
MANUFACTURERS’ IVD WHERE APPLICABLE. THIS VEHICLE CONFORMS TO ALL
APPLICABLE FEDERAL MOTOR VEHICLE SAFETY STANDARDS, IN EFFECT IN
V.I.N.
TYPE VEHICLE: MULTI-PURPOSE PASSENGER VEHICLE
The tires and wheels with sizes and ratings designated above have been equipped with
this vehicle by Fleetwood. Any replacement tires installed must meet the same
specifications and minimum load requirements.
FLEETWOOD RV, INC.
PRODUCT :
YEAR :
MODEL :
FIN:
kilograms
( pounds )
GROSS VEHICLE WEIGHT RATING (GVWR)
0
(
)
FACTORY WEIGHT ON
0
(
)
OCCUPANT AND CARGO CARRYING CAPACITY
0
(
)
FULL FRESH WATER TANK:
gal @ 8.3 lb/gal
0
(
)
FULL WATER HEATER TANK:
gal @ 8.3 lb/gal
0
(
)
GROSS COMBINED WEIGHT RATING (GCWR)
0
(
)
MAX. GROSS TOWED WEIGHT
0
(
)
MAX. TONGUE WEIGHT
0
(
)
MOTORHOME OCCUPANT AND CARGO CARRYING CAPACITY
VIN:
THE COMBINED WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER EXCEED:
0 kg or
lbs
Safety belt equipped seating capacity:
CAUTION:
A full load of water equals 0 kg or
lbs of cargo @ 1 kg/L (8.3 lb/gal) and the tongue
weight of a towed trailer counts as cargo
CAUTION: LOAD CARRYING CAPACITY REDUCED
Modifications to this vehicle have reduced the original load carrying capacity by
_____________________ kg or ____________________ lbs
01-3
Introduction
CHASSIS AND VEHICLE
IDENTIFICATION
Several numbers are used to identify the vehicle
and components used on the vehicle.
The V.I.N. or Vehicle Identification Number is
assigned by the chassis manufacturer and is the
number used for vehicle registration. The V.I.N.
is found on the Federal Certification Tag attached
on the interior wall behind the driver’s seat. Refer
to this information when ordering parts from the
chassis manufacturer or chassis dealer service
center.
The F.I.N. or Fleetwood Identification Number
is located just behind the driver’s side door on the
outside of the motor home OR outside the main
entry door. Use this number when ordering parts
through your Fleetwood dealer.
SUSPENSION ALIGNMENT
AND TIRE BALANCE
The front suspension and steering system of
this vehicle was accurately aligned at the fac-
tory before delivery to the dealership . However,
after you have fully loaded the vehicle accord-
ing to your personal needs, have the alignment
checked and adjusted, if necessary. To help pre-
vent uneven tire wear, check the front-end align-
ment periodically.
Please note that front-end alignment after
retail delivery is the owner’s responsibility and
is not covered under the warranty .
(Example)
Located on the left of the main entry
door or on exterior left front side of
the motor home.
(Example)
FLEETWOOD RV, INC.
OF
PLAN APPROVAL NO.
F.I.N.
MFD. ID. NO.
MODEL
DATE OF MFR. MO:
YR
:
F.I.N. (Fleetwood Identification No.)
Содержание 2013 Jamboree
