If you need help or have any questions, contact us at
1-844-498-9450
or
Daily Long Term Asset Tracker Installation
Installing Your Daily Long Term
Asset Tracker
Prepare your device to report into the FleetSharp
portal
The ATLT-Daily has a self-contained battery pack, so it is shipped in
‘Ship Mode’ to preserve battery life. When you are ready to install and
have the device report in, place the device outside with a clear view
of the sky, and take the device out of ship mode. PLEASE NOTE
: The
device may take up to 24 hours to check-in and provide a position for
the first time.
NECESSARY FOR INITIAL CHECK-IN:
To take the device
out of ‘Ship Mode’, press and hold the button on the
front for 5 seconds after activation.
Attach your tracker
The daily long term asset tracker can be attached to your equipment
with the included screw mount or the optional magnet mount (sold
separately). Choose a mounting point that will give the top of the
device a clear line to the sky, and one that will not result in elevated
temperatures. Once installed and activated, your tracker will check in
every 24 hours.
1
2
Weak signal:
Installed vertically
Limited signal:
Installed under
asset
Asset
Asset
Install Positioning Matters
Asset
Strong signal:
Installed with clear
line to sky
Not intended for use:
• Indoors
• Inside of metal casings
• Underground
•
In remote, “no cell coverage” areas
Performance and results will vary if used
in the above environments.
