Alerts:*
Engine Management Alerts
1.
Go to
Alerts
on the top menu bar.
2.
Select
Engine Management Alerts.
3.
Select the vehicle from the list and it will display the
current alert settings.
4.
Click the
Save
button to continue.
Device Removal Alert
and
Over Speed Alerts
1.
Under the
Alerts
menu, select
General Alerts.
2.
Select the vehicle from the list.
3.
In
General Parameters
tick to box labelled
Trigger
Main Power Cut Alert,
speed limit is selected via the
drop down menu list labelled
Speed.
*When setting alerts, a recipient’s email or mobile
number must be entered to receive the alerts. To receive
mobile alerts, a mobile number must first be entered in
Setup > Messaging Service.
Monitoring:
For real time monitoring, go to the
Vehicle
on the top
menu bar, in the drop down menu you will see
Real Time
ECU Monitor.
Note:
The OBD300 comes preconfigured to your vehicle’s OBD
protocol (ie. Passenger car, Heavy Vehicle). The device will
not change protocol mode if reinstalled in a different
vehicle type. Device reset can only be performed by
calling Fleetminder Tech Support on (08) 9383 7833.
