![Fleet Management FMI-HDP Скачать руководство пользователя страница 22](http://html.mh-extra.com/html/fleet-management/fmi-hdp/fmi-hdp_installation-and-user-manual_2303524022.webp)
16
PLAY
unit is in playback mode
POWER
unit is powered on
TRIGGER_ACTIVE any of the X triggers are in the active state
DISK_FULL
Recording is in STOP mode, disk is full so
recording has stopped
T1-T7
activated when the specified trigger has voltage
applied (HIGH state)
USER_CONTROL User has sent the trigger command to the MDVR
using telnet protocol
ACCEL
acceleration has exceeded normal limits as
defined in GPS Setup Menu
SPEED
speed has exceeded normal limits as defined in
GPS Setup Menu
MDVR PASSWORD MENUS
Figure – Password setup
A password can be used to control access to some or all configuration
functions. A display must be connected to the video output of the MDVR
to display the password prompt. When the user attempts to use a
protected feature the display will prompt for the password. The front
panel keys are used to select each character and enter the password
before access is granted.
The password field consists of 6 characters with a default password of:
“123456”. After this sequence is entered, the system allows access for
30 minutes (or after cycle power) before the password is enabled again.
The unit supports 4 levels of password protection with the ability to
Содержание FMI-HDP
