
37
APPENDIX
(Upgrade)
Make a folder called [program] on the SD root folder as shown below,
Copy “XXXXXX_x.x.x.img” file to the SD card [program] folder.
1. Prepare
Firmware
2.
Upgrade
FF
2000
Insert the prepared SD card to
FF
2000 unit and turn on the
power.
The Blue & Red LED will blink while the unit is upgrading. It will also
‘beep’ continuously. Upgrading the unit usually takes about 30 seconds.
Warning:
Do
not
turn
off
the
power
during
upgrading.
If
the
upgrade
fails,
the
FF
2000
unit
should
be
returned
to
your
local
distributor.
Once the upgrading is finished, the unit will automatically turn off and on the power.
NOTE: To get the upgrade firmware, please contact your local distributor.