Flavor Burst CTP 80BEV-INT-2S, Дополнение к руководству по эксплуатации

Страница: 31 / 46

30
Electronic Parts and Connections (Continued)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
5 ELE 530 FCB SPIGOT SWITCH ASSEMBLY KIT
1*
0**
FOR “FCB” SYSTEMS : Activates the syrup
pumps when draw handle is activated.
*1 for 80FCB systems.
**
0 for 80SS, 80BLD, & 80BEV systems.
5A
MIS 3179 FCB MAGNETIC ACTUATOR PIN 1 ea. Activates the Spigot Switch.
6
MIS 3188
CABINET UNIT OPEN CLOSE
BUSHING
1 Protects the cables and tubes.
7
FAS 2014 8-32 X 1/2" PAN HEAD 10
Secures various parts within the electronics
box.
8 MIS 3187 CABINET UNIT HOLE CAP PLUG 1 Covers the unused hole on the Taylor Panel.
9
ELE 434 POWER CABLE 1 Powers the electronics board.
10
ELE 485CTP
120V POWER ENTRANCE MODULE 1
Provides a power connection to the outside
of the cabinet.
11
ELE 932
PUMP & SANITIZER CABLE
HARNESS – CTP DLX
1
Provides power to the syrup and sanitizer
pumps.
12
ELE 933 POWER SUPPLY JUMPER CABLE 1
Connects the power supply to the electronics
board.
13
ELE 931 EXTERNAL ROTOR CABLE
1*
0**
FOR “SS”, “BLD” & “BEV” SYSTEMS:
Connects the external rotor cable to the
electronics board.
*1 for 80SS, 80BEV, & 80BLD systems.
**0 for 80FCB systems
14-1
INJ 330TS INJECTOR MOTOR ASSEMBLY
1*
0**
FOR “SS” & “BEV” SYSTEMS: Supplies
power to Motor to turns gears.
*1 for 80SS & 80BEV systems.
**0 for 80FCB & 80BLD systems
OR…
14-2
INJ 330-
TSC INJECTOR MOTOR ASSEMBLY -
BLEND 1*
0**
FOR “BLD” SYSTEMS : Supplies power to
Motor to turns gears.
*1 for 80BLD systems.
**0 for 80FCB, 80BEV, & 80SS systems.
15
ELE 911 ELECTRONICS BOARD 1 Provides power to the system.
16 ELE 525M
MALE TO MALE 48” SWITCH EXTENSION
1 Connects Touch Panel to the freezer switch.
17
FAS 2035 8-32 NUTS - EXT. LOCK WASHER 5 Secures various parts to 8-32 screws.
18 FAS 2071 THUMB SCREWS 6
Secures the Electronics Panel to the back of
the unit
19 ELE 930 INTERNAL ROTOR CABLE
1*
0**
FOR “SS”, “BLD” & “BEV” SYSTEMS:
Connects the external rotor cable to the
electronics board.
*1 for 80SS, 80BEV, & 80BLD systems.
**0 for 80FCB systems
20
ELE 926 RJ45 ETHERNET CABLE - INTERNAL 1
Connects the Ethernet cable to the
electronics board.
21 MIS 3216 CLOSURE PLUG 5/8 INCH
2*
3**
Closes up extra opening in the base panel.
*2 for 80SS, 80BEV, & 80BLD systems.
**3 for 80FCB systems
22 ELE 925
RJ45 EHTERNET CABLE - EXTERNAL
1 Connects the Touch Panel to the cabinet.
23
ELE 927 RJ45 ETHERNET CABLE GLAND 1 Secures the Ethernet cable to cabinet.