FLAVIA BI 45 DELIA, Руководство по эксплуатации и установке, Страница: 10 / 36

Operation and installation manual
DISHWASHERS
8
WATER SOFTENER
There are two methods to soften water: ei-
ther with a softener, or a washing agent.
Water hardness values may vary from place
to place. If your dishwasher uses hard water,
this may lead to formation of scale and de-
posits on dishes.
The appliance is equipped with a special
softener to use salt, specially developed for
removal of lime and minerals from water.
HOW TO CHARGE SALT
INTO THE SOFTENER
Make sure to always use salts meant for
dishwashers only.
The salt container is beneath the lower grid.
The way to fill it in is as follows:
1. Remove the lower basket, unscrew the
salt container cover to remove that.
2. If you fill in the container for the first time,
fill it with water (2/3 of the vol.).
3. Insert the funnel end (included), charge
approximately 1.5 kg of salt. It is normal, if
some water flows out of the container.
4. Carefully screw in the cover.
NOTE:
1. The salt container should be refilled,
when the “S” pictogram (upper left
corner of the display) starts to illumi-
nate. Even if the container is properly
filled, the pictogram may still illumi -
nate until salt is dissolved complete-
ly.
2. If you have spilled the salt, you can
wash it out, using the
“Quick”
pro-
gram
SALT CONSUMPTION CONTROL
The list of the dishwasher functions also in-
cludes the salt consumption control, depending
upon water hardness. This is to optimize salt con-
sumption, and you can control it in the following
way:
1. Press the ON / OFF button.
2. Press and hold (60 sec) the program selec-
tion button. Wait for the sign H1 (or H2, H3 or H4)
to be displayed. At that, salt and rinsing agent in-
dicators will blink.
3. Pressing the program selection button, se-
lect desired salt dosage, depending upon water
hardness (see the “Water hardness table”). With
each touch of the button you switch to the next
mode: Н1-Н2-Н3-Н4-Н5-Н6.
4. To complete selection, press the ON/OFF
button.
These settings are required each time you dis-
connect the dishwasher from the mains.
You may be informed of water hardness in
your location at local authorities or upon a lab re-
search of a water sample.