2.6
MAKING THE ELECTRICAL CONNECTION.
WARNING
: THIS APPLIANCE MUST BE EARTHED AND SHOULD BE
PREFERABLY CONNECTED VIA A 3 AMP FIXED FUSED
SPUR WITH A MINIMUM CONTACT SEPARATION OF 3MM.
IT MAY HOWEVER BE CONNECTED TO A 3 PIN PLUG TO
BS 5733, THAT IS FITTED WITH A 3 AMP FUSE TO BS
1362.
2.6.1
Remove the painted fan box cover, secured with 3 off screws as shown
in fig 15, page 15.
Fig. 22
2.6.2
Connect the 2 off 6 way molex connectors to the fan power cable
emerging from the electronic circuit board, as shown below in Fig. 22
2.6.3
Replace the fan box cover and secure with 3 off screws as shown in
fig. 15 on page 15.
2.6.4
Make the final electrical connection to the 3 amp fixed fused spur
(preferred method) or 3 pin plug.
2.6.5
Proceed to commission the appliance as detailed in section 2.7 to 3.4.
Connect the 2 off
terminal
connectors
together as
shown
20
