manualshive.com logo in svg

Flavel FSSC00MN, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Flavel FSSC00MN Скачать руководство пользователя страница 35

35

To ensure that the release of fibres from these R.C.F (Refractory Ceramic
Fibre) articles is kept to a minimum, during installation and servicing we 
recommend that you use a HEPA filtered vacuum to remove any dust 
accumulated in and around the appliance before and after working on the 
appliance.  When replacing these articles we recommend that the replaced
items are not broken up, but are sealed within heavy duty polythene bags,
clearly labelled as “RCF waste”.  RCF waste is classed as a “stable”, non
reactive hazardous waste and may be disposed of at a landfill licensed to
accept such waste   Protective clothing is not required when handling these
articles, but we recommend you follow the normal hygiene rules of not
smoking, eating or drinking in the work area, and always wash your hands
before eating or drinking.

USER REPLACEABLE PARTS

The only user replaceable parts on this fire are the fuelbed components and 
coals or pebbles which may be replaced as described in the above section.  Replacement of any other
parts must be carried out by a competent person such as a CORGI registered gas installer. The part
numbers of the user replaceable parts are as follows, these are available from CFM Europe Ltd. who may
be contacted at the number on the rear cover of this book.

Complete Coal Pack

B-91480

Complete Pebble Pack

B-91520

Coal Fuelbed Matrix

B-91500

Pebble Fuel-bed Matrix

B-91540

Coal Fuelbed Front Rail

B-91490

Pebble Fuelbed Front Rail

B-91530

Loose Coal Pack 

B-91510

Loose Pebble Pack

B-91550

Due to our policy of continual improvement and development the exact
accuracy of descriptions and illustrations cannot be guaranteed.

Part no. B-90710

Issue 2

CFM Europe Ltd.

Trentham Lakes

Stoke-on-Trent

Staffordshire

ST4 4TJ

Telephone - General Enquiries :

(01782) 339000

Telephone - Service :

(08700) 101187

Содержание FSSC00MN




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды