4.3
REMOVING THE GAS VALVE FROM THE FIRE
a)
Disconnect the appliance from the gas supply.
b)
Remove the upper canopy as shown in section 4.1
c)
Remove the left hand side panel, by unscrewing the rear panel fixing
screws, then the base panel retaining screw, as shown below in fig. 11
Fig. 11
c)
Disconnect the pipes to the control valve, thermocouple and remove the
control valve locknut as shown below in fig. 12
Fig. 12
Rear side panel
retaining screws
Front retaining
screw on the
underside of
the leg support
bracket
Gas Inlet Pipe
Main Supply Pipe
Pilot Pipe
Control Valve
Locknut
18
