17
·
Turn the water tap on. Open the door of the
machine.
·
Check that the upper and lower arms can rotate
freely.
·
Pour (Put in) the detergent.
·
Push in the on/off button and check that the
programme indicator lights come on.
·
Check the salt and rinse aid level indicator
lights before you start the machine. If necessary
add salt and rinse aid.
·
Select the required programme by referring to
the programme chart.
·
Select the desired programme by using the
Programme Selection Button.
·
Press start / stop button and check that the
start / stop indicator light comes on.
·
Close the door then programme starts.
·
An audio signal with an interval of 10 seconds
warns you to switch your machine off when the
selected washing program ends. This audio signal
warns you for a duration of 1 minutes and then
turns off.
!
Do not open the dishwasher door whilst the
appliance is in operation. However, in case the
door is opened while the machine is working,
then a safety mechanism ensures the machine
immediately stops. Water may be very hot, so be
careful.
!
Care must be taken if opening the door, as
steam and water will escape.
·
Press the on/off button after the programme
is completed. The indicator lights will go off.
·
Turn off the water tap, unload the baskets.
!
Just after the dishwasher has started the
selected programme, if you find that you want to
put in another item to be washed, open the door
carefully. Care must be taken if opening the door,
as steam and water will escape. Then after putting
in the item, close the door. The dishwasher will
resume operation.
Dishes should be allowed to cool for about
15 - 30 minutes after the end of the programme.
You will improve drying results by leaving the
dishwasher door ajar for at least 15-30 minutes
as soon as the programme finishes.
! Care must be taken when opening the
door, as steam will escape.
First unload the lower, then the upper rack. This
prevents drops of water from falling onto the full
lower basket when the dishes in the upper basket
are being removed.
Cleaning your machine at regular intervals ensures
longer product life and reduces the risk of recurring
problems. Clean spray arms and in particular filters
at least once a week
!
Always unplug the appliance and turn off the
water supply before cleaning.
To clean the door seal, use a neutral detergent
and a damp cloth. To clean the control panel, use
only slightly damp cloth.
!
Do not use abrasive detergents.
If the appliance is not going to be used for a long
period of time, switch off, turn off the water clean
and leave the door ajar.
