Flavel FDW45, Инструкция по установке и эксплуатации

Страница: 12 / 23

12
- These detergents do not contain rinse aid so you
need to use the rinse aid setting as described in the
manual, making sure that there is rinse aid in the
rinse aid dispenser with every wash and that you
refill the rinse aid dispenser with rinse aid every time
it is empty.
- These detergents will not give you the same drying
performance that you can obtain by using separate
detergent, salt and rinse aid. To increase the drying
performance:
- Put your appliance’s rinse aid setting at “1” and
apply rinse aid. When the rinse aid is used up, add
more rinse aid to the rinse aid dispenser.
- If you use combined detergents with a rinse aid
setting higher than 1, hand contact may leave
rainbow-coloured water stains on the washed items
and inside the machine.
- These detergents do not contain softening salt so
you need to use the softening setting as described
in the manual, making sure that there is salt in the
water softener with every wash and that you refill
the water softener with salt every time it is empty.
Important warning
- Should you encounter a problem that has previously
never occured after you start using these detergents,
contact the detergent manufacturer directly. You
will find contact details on the packet.
If you stop using this kind of detergent:
- Ensure that the salt and rinse aid dispensers are
full.
- Put the water hardness setting at the highest level
and run a wash cycle with the appliance empty.
- After washing while empty, return the water
hardness setting to the correct level for your mains
water hardness shown in the manual.
- Put the rinse aid setting at the correct level.
You will obtain the best results from your
dishwasher if you use separate detergent, rinse
aid and water-softening salt.
Detergent manufacturers also produce combined
detergents known as ‘two-in-one’ and ‘three-
in-one’.
Three-in-one: These products contain detergent,
rinse aid and water-softening salt.
Two-in-one: These products contain detergent
and either rinse aid or water-softening salt.
In general, you will obtain satisfactory results
from combined detergents only under specific
usage conditions. These detergents contain
predetermined amounts of rinse aid and/or
softening salt. This means that you cannot adjust
the amount of water-softening salt and rinse
aid required to suit the water hardness level in
your home.
You should bear the following points in mind
when using such detergents:
- Be sure to check the specifications of the
product you are using and whether it is a
combined product or not.
- Follow the instructions on the packet when
using these products.
- The use of these products at the correct
appliance settings will ensure economical use
of salt and/or rinse aid.
- If the detergent is in tablet form, never place
these in the internal section or cutlery basket
of the dishwasher. Always place the tablets in
the detergent dispenser of the detergent holder.
- These detergents will not give you the same
drying performance that you can obtain by using
separate detergent, salt and rinse aid. To increase
the drying performance:
- Put your appliance’s rinse aid setting at “1”
and apply rinse aid. When the rinse aid is used
up, add more rinse aid to the rinse aid dispenser.
- If you use combined detergents with a rinse
aid setting higher than 1, hand contact may
leave rainbow-coloured water stains on the
washed items and inside the machine.
- If you use combined detergents without adding
salt, lime scale may form especially on glasses. To
avoid lime scale formation:
- Put your appliance’s water softener setting at “1”
and add salt. When the salt is used up, add more
salt to the water softener.