Fig. 4
g)
The fire can now be switched between HIGH rate heat input and LOW
rate heat input by pressing the “DOWN” arrow on the handset. To
reduce the flame height of the main burner incrementally, press the
arrow momentarily. To reduce the heat input directly down to the mini
mum level, press the “SMALL” flame arrow on the handset twice,
NOTE : The flame will go to HIGH rate heat input before going to
designated LOW rate heat input. To return back to HIGH rate heat input
press the “LARGE” flame button twice. To put the fire in In “STANDBY
MODE” (only the pilot remains lit) press and hold the “SMALL” flame
arrow on the handset.
AFTER THE PILOT FLAME HAS BEEN EXTINGUISHED, IF YOU
WISH TO RE-LIGHT THE APPLIANCE YOU MUST WAIT AT LEAST
THREE MINUTES BEFORE TRYING TO RE-LIGHT THE FIRE.
6
“STAR” / “OFF” button
“UP” button
“DOWN” / “STANDBY”
button
“LED” handset light