FLAT DISPLAY TECHNOLOGY
LCM0642
xx
V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: 886-4-22619577 Fax: 886-4-22623978
This technical specification is subject to change without notice
15
8. Installing the Monitor
8.1 Power cable connection:
Connect the power cord to the AC outlet, and connect the power to the monitor through the AC/DC
adapter.
8.2 VGA signal cable connection:
Plug one end of the 15-pin signal cable to the VGA connector at the rear of the PC system and the other
end to the Chassis monitor.
Secure the connectors with the screws on the cable connector at both ends.
8.3 Video / S-Video Cable connection:
If required, connect Video / S-Video Cable from the Chassis Monitor to the DVD or CCD Camera.
8.4 Switch on the power:
Switch on the power switch on the rear cover of the Chassis Monitor.
A. VGA D-sub 15 (Female)
B. Touch USB or RS232 Interface
C. S-Video (Y/C Video) In
D. Video (CVBS) In
E. DC-In (+12V
DC
The DC jack core is positive)
E
D
C
B
A
