3
3. Product Diagram
Flashing or noisy picture is a sign of weak signal. Press the EQ button of the receiver, this will
automatically adjust the signal sensitivity to make the signal better. If there is no signal improvement
after adjustment, please set the refresh rate of input resolution from 60HZ to 24HZ. If the signal is not
normal this indicates that the LAN cable has quality problem.
The HDMI signal receiving sensitivity of some display devices is not that good, the length of the LAN
cable can be reduced to improve signal stability.
Flashing or noisy picture
2.4 Troubleshooting
Please check whether the indicator light of the receiver is on; if not, please check whether there is a
signal input in the transmitter or whether the receiver is connected with the display device.
Or you can connect the local output of the transmitter to see if there is signal output. As the
receiver’s signal and local output’s signal is synchronous output.
Receiver - no signal output
Receiver product diagram
Transmitter product diagram
