FlashPoint ZOOM TTL FLASH R2, Руководство пользователя, Страница: 20 / 24

20
Troubleshooting
1. Unable to trigger flash or camera shutter: Make sure batteries are installed
correctly and Power Switch is turned on. Check if the transmitter and the
receiver are set to the same channel, if the hotshoe mount or connection cable
is well connected, or if the flash triggers are set to the correct mode.
2. Camera shoots but does not focus. Check if the focus mode of the camera or
lens is set to MF, indicating Manual focus. If so, set it to AF, Auto Focus.
3. Signal disturbance or shooting interference. Change a different channel on the
devices.
4. Operating distance limited or flash misfiring: Check if batteries are exhausted.
Maintaining your Radios
• Avoid sudden impact. The device may fail to work after strong shocks, impacts,
or excess stress.
• Keep dry. The product isn’t water-proof. Malfunction, rust, and corrosion may
occur and cause irreparable damage if soaked in water or exposed to high
humidity.
• Avoid sudden temperature changes. Condensation occurs due to sudden
temperature changes such as moving out of a building with higher temperature
and humidity to a much cooler outdoor environment. Please put the radio in a
pouch or plastic bag beforehand.
• Keep away from strong magnetic field. The strong static of magnetic field
produced by devices such as radio transmitters leads to malfunction.