inStALLAtiOn MODe SeLeCtiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
MODULe PrOgrAMMing PrOCeDUre - PtS witH KeyPOrt
8
Module Programming
Procedure completed.
5
Wait, LED will turn solid GREEN
for 2 seconds.
4
Push start button twice [2x] to
ON position.
ENGINE
START
STOP
x2
6
Push start button once [1x] to
OFF position.
Remove keyfob from keyport.
ENGINE
START
STOP
x1
7
Press UNLOCK on keyfob.
2
Turn OFF keyless switch.
ON
ON
OFF
OFF
MAIN
SYSTEM
ACCESS
KEYLESS
3
Insert keyfob in keyport.
ENGINE
START
STOP
1
Open glove box and locate
keyless switch.
!
If the vehicle is equipped with a power liftgate: Open and
close the power liftgate with the OEM keyfob.
Page 15 of 17
FLC-AL(DL)-HA4-EN
20140120
iNstall Guide
www.flash-it.com
audiovox electronics corp. © 2013
ALL IN ONE
Honda/acura
Doc. No.: ##13626##
